5.5 GPM 3500 psi Smoking' Hot Bandit Comet pump Honda GX630

 Smoking' Bandit series hot water pressure washer skid unit.

 Heavy duty powder coated frame.

 41L x 43W x 41H

 675 lbs.

 Top to bottom schedule 80 coil for maximum temperature rise.

 Corrosion resistant stainless steel coil wrap.

 12-gallon aluminum diesel and gasoline fuel tanks.

 Key start Honda engine.

 Must supply your own battery and battery box.

 Must supply your own bypass hose and bypass barb on the unloader.

 Belt driven RW5535S Comet pump.

 Beckett burner.

 Stainless steel control panel with adjustable temperature control (keep it under 180 degrees).

 4-groove "Bandit" belt for uniform tension and maximum power transfer.

 EZ-line belt tension system.

 Easy access two price belt guard can be removed and installed.

 Easy pump and engine oil drains.

 Over pressure and thermal relief protection.

 We recommend that you plumb this unit to a minimum of a 100-gallon water tank or 275 gallon IBC tote.

 Included with the skid:

•  Gun/wand assembly with insulated wand and quick connects.
•  High pressure hose w/quick connects.
•  Chemical injector assembly w/quick connects.
•  4 color-coded QC spray nozzles.
•  1 color-coded QC chemical nozzle
• Can not be shipped inside the state of California

 We strongly recommend that you purchase our PL-4-TO or PL-4-TA kit which has almost everything you need to correctly plumb this unit. You will need to add a 1/2" hose barb (4784) and at least 12' or more of 3/8" yellow ag hose to plumb your bypass hose back to the tank (AGY06). Upsizing the hose ID’s will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well as move much faster when using your surface cleaner.

 Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying, supply enough water to your pump using the 'double your supply hose id in relation to your inlet port' rule and keep your pump cooler leading to less down time. Double check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4". Always use medium thread lock on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.

 Are you tired of releasing the gun trigger to watch pressure build up in the high-pressure hose, gun, wand, quick connects and O-rings?

 Tired your pump going into bypass because another O-ring failed, and you need to replace the plug and/or coupler?

 Do you want a smooth action when you pull your gun trigger?

 Are you struggling with moving your stiff pressure washer hose?

 Do you need to place a death grip on your ladder when you pull the trigger on your gun to prevent falling?

 This skid can be ordered with a flow actuated K7.2 unloader to make your pressure washing experience easier on your body!

 If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.

 SKU: PW.BSH5535HC