Extruded aluminum skid mounted cold 7.9 GPM 2500 PSI Bandit pressure washer.

B-K8025HC-E (electric start or key start) with pressure-trapped unloader.

This unit will not arrive with a battery.

This unit offers a beefy base. PSI offers an easy-to-access pump tensioner underneath the Comet pump. The aluminum belt guard is assembled with heavy duty bolts instead of rivets.

7.9 GPM 2500 psi Honda 13 hp GX390 Comet TW8030S pump banded belt extruded aluminum frame, black spring pressure trapped unloader, gun/wand assembly with brass quick connects, 50' grey high-pressure hose with quick connects, 4 x 10.0 orifice colored quick connect nozzles. Oil prefilled in pump and engine.

****Important****

Please purchase a length of 3/8" (AGY06) or 1/2" (AGY08) yellow AG hose. We offer it by the foot.

Purchase a 6741 chemical injector and quick connects (4630, 4959), a length of 1/4" clear braided poly hose (CBP04), and a filter (TF-C) for this unit if you need an injector.

We strongly recommend that you purchase our PL-8-TO or PL-8-TA kit for a tote or a horizontal leg tank which has almost everything you need to correctly plumb this unit. Please add the items mentioned above to complete your installation.

Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying water, help your pump run at a cooler temperature, supply enough water to your pump using the 'double your supply hose ID compared to your inlet port' rule and keep your pump cooler leading to less downtime. Double-check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4. 

Always use medium thread lock on your high pressure fittings instead of Teflon tape. Teflon tape will end up in the pump check valves or clog nozzles.

If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold. Did you know you can use dual dual-port chemical injector to apply chemicals at an even stronger ratio? Try the GP100791. It has two barbs. Try one of our original slotted PVC filters (TF-D) with two barbs made especially for this dual-ported chemical injector.

We recommend a minimum of a 200 gallon water tank or IBC tote.

Add a Hudson float valve (Hudson-HT) and Hudson float valve installation kit (Hudson-A) to prevent over-filling your water tank. The Hudson float valve will automatically stop the flow into your tank when installed properly in the headspace of your water supply tank.

We highly recommend adding the best high-pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a  Classic surface cleaner. You will need to ask for two nozzles 5.0 25 degrees for a two nozzle spray bar or four nozzles.

 The 19" Whisper Wash Classic, the 24" Ground Force, the 24" Lil Big Guy, or the 28" Big Guy with the upgraded 3/8" high pressure hose is the perfect complement to this cold pressure washer. Keep in mind that the wider the surface cleaner, the slower you will move.

As with any pressure washer, do not adjust the unloader. The unloader is set at a spike pressure of 200 psi above the operating pressure of the pump and is meant to be left alone. If you need less pressure, change out the nozzles to a larger orifice and never smaller than what is called for using factory specifications using GPM and pressure. This unit requires an 10.0 orifice or larger nozzle. You can add a 6540-8 Jrod kit, and the Kyle Davis long range shooter nozzle (SN8I) to this pressure washer to experiment with pressure and distance.

 Pair this unit with a 1/2" All-Flo 17 GPM air diaphragm soft wash system for the most efficient cleaning rig. The 1/2" All-Flo can be used to soft wash everything from the roof to a giant commercial building and the 8 GPM pressure washer can be used to rinse using either the new M5DS adjustable nozzle or using a big 0050, 0060, or 2560 nozzle on a gun/wand assembly with low pressure.

Can not be shipped inside the state of California 

 SKU: PW.BK8025HCE