Important: 
Some accessories and parts are placed at the side of the Styrofoam. This machine was thoroughly tested by manufacturer, it's normal to have some water residue in the water tank. 

How to use? 

Hair steaming method: 
1.Wash your hair and dry it until half dry, don't use the steam cap so the steam can penetrate your scalp and bring moisture straight to the roots and hair shaft 
2.Place the machine on a desktop, fill in water then connect power to it 
3.Press power button then switch steam button, steam will come out in 5-6mins, then you can start using 
4.Steam time 10-15 minutes 

Facial steaming method: 
1. Wash your face with a facial cleanser before steaming 
2. Put the steamer securely on the table, add water and connect to the main power supply. 
3. Supply some water until the water comes up to the upper limit, Press the steam ON button. 
4. Place your head into the cap carefully and adjust the height of your chair appropriately. 
5. Begin facial treatment，the safety distance is 30-50 cm from the spray hole, so that your face won’t get too hot,steam time 10-15 mins .

Warm Note: 
1. Do not cover your head below forehead. 
2. Supply some clear water (between upper limit and lower limit). 
3. Normally 5-15 minutes treatment would be enough. 
4. Turn off the steamer after usage, and pouring it out the water until water cool to avoid being scalded. 
5. Please put a towel cover the shoulder to prevent water burns while performing hair care. 
6. When the steamer is used for the first time, some water may remain in the water tank. This is residual water used for inspection in the factory and We guarantee the product you receive is a whole new one 

Specification: 
Power: 400 W 
Rated Voltage: AC110V 
Rated Frequency: 60Hz 
Temperature of this steamer: 45 degree 
Item size : 13.58*9.45*15.16 inch