The Angel Eyes E5 Hybrid Keychain Flashlight boasts a dual LED system for a primary output, including 6500K Cool White and 4000K Warm White High CRI. Additionally, the flashlight features 3 LEDs on the front side with White/UV and White/Red options. The UV LED is set up to charge the Glow-in-the-Dark body to achieve optimal brightness and durability. A dual button interface provides clear access and user-friendliness.

Parameters:
Material: Fluorescence polycarbonate (Green)
Main LEDs: Luminus SST-20 6500K cool white LED, SST-20 4000K Warm White 95 CRI LED
Auxiliary Emitters: Warm White*2 + UV, or Warm White + Red*2
Battery: Built-in 330mAh Li-Po battery, Replaceable AAA battery (1.2V Ni-MH or 1.5V Alkaline), and 10440 3.7V Li-ion battery.
Water Resistant: IPX6
Size: 66.1mm/2.6”(L)*27.5mm/1.08”(W)*13.5mm/0.53”(H) Weight: 41g
Accessories:  User Manual*1, Key Ring(Size L) *1. Keychain Ring(Size S) *1, Pocket Clip *1, and warranty Card*1

Text and photos review by 1Lumens. 

Operation 

Button 1 (Primary LEDs)

1. Lock: from off, rapid quad click or above, then the Lipo battery indicator (blue) will flash 3 seconds.

2. Unlock: from locked, rapid quad click or above, then the AAA battery indicator (green) will flash 2 seconds.

3. Moonlight: from off, single click, another click to turn off.

4. Switch battery manually: at moonlight mode, rapid triple click; a) from Lipo battery to AAA battery, if succeeded, the Green indicator will come on for 3 seconds, oppositely, the Blue indicator will flash 2 seconds; b) from AAA battery to Lipo battery, if succeeded, the Blue indicator will come on for 3 seconds, oppositely, the Green indicator will flash 2 seconds. 

5. Momentary-on: from off, press and hold, release to turn off.

6. Turn on the memorized on constantly: rapid double click, then click to cycle through low-med-high. 

7. Strobe: from off, rapid triple click, click to turn off.

8. Turn off: press for 0.5s; turn off will memorize the last used mode. 

Button 2 (Side LEDs)

A. E5R

1. Warm white: from off, single click to turn on from low mode, then click again to cycle through low-high, press for 0.5s to turn off, no memory. 

2. Solid red: rapid double click to turn on from the memorized mode, then click to cycle through low-high, then press for 0.5s to turn off, the turn off will memorize the last used mode. 

3. Red signal: rapid triple click to turn on from the memorized mode, then click to cycle through flash-beacon, then press for 0.5s to turn off, the turn off will memorize the last used mode. 

B. E5U (Review by ZeroAir)

1. Warm white: from off, single click to turn on from low mode, then click again to cycle through low-high, press for 0.5s to turn off, no memory. 

2. UV: rapid double click, then press for 0.5s to turn off.