Pressure Transducer 0 to 50 PSI

All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Compatible Fluids / Gases:

• Refrigerant
• Motor Oil
• Diesel
• Hydraulic Fluid
• Brake Fluid
• Water
• Waste Water
• Hydrogen
• Nitrogen
• Air

Operating Temperature:

• -5°C to 60°C

Media Temperature:

• -40°C to 125°C

Construction:

• 1.4301 (AISI304) Housing
• 1.4542 (AISI630) Pressure Connection
• 1.4542 (AISI630) Sensor

Cable:

• IP67, PVC

Cable Length:

• 3.28 feet (1.0m)

Vibration:

• 15 g RMS (20 – 2000 Hz)
• 25 g sin (80 – 2000 Hz)
• 1 oct./min, (1x @ 25°C)

Shock:

• 50 g/11 ms

EMC Compatibility:

• EN 61000-6-3
• EN 61000-6-2

Humidity:

• Max. 95% relative

Weight:

• 50g (1.8 oz)