Blowtie 2 Spunding Pressure Relief Valve - 0 to 15PSI

• This awesome compact solution for adjusting residual pressure in your fermenter makes pressure control easier than it's ever been.
• This can be used for compressed air, Co2, nitrogen, mains water supply and many other things but it's primary use is to control the residual pressure inside fermenters.
• The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals.
• The design utilizes the reliability of the KegLand patented duotight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.

Pressure Fermentation's

• With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.
• The BlowTie has been designed specifically for this reason.

Pressure Transfers

• When transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated.
• For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.
• Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.
• Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.
• The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.

Instructions:

• Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure.
• We would recommend gassing a keg to a known pressure e.g. 15 psi then attach your Blow Tie Kit to the keg and adjust to 10 psi.
• NOTE: These small gauges enable the regulator to be so compact however for more accurate pressures readings we recommend getting different gauges to suit the pressure range you want to use.
• Mini Gauge 0-23 psi
• Mini Gauge 0-30 psi
• Mini Gauge 0-60 psi
• Mini Gauge 0-150 psi
• These gauges are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.

IMPORTANT WARNING:

• Do not exceed gauge pressure.
• If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge.(ie if you are using the 0-60 psi gauge.
• Do not set pressure above 60 psi or damage to the gauge may occur.