Specifications

• Product Category - Battery Chargers
• Warranty Period - 5 Years
• Model - EN31240
• Product Type - 12v 40Amp Battery Charger
• Ingress Protection - IP32 (Basic drip proof in vertical orientation)
• Float - 13.4 – 13.8 V
• AC Input Voltage - 90 to 265 VAC
• Output Current Rating (Amps) - 40
• DC Output - Three (1 fully independent, 2 common with diode isolation)
• DC Output Ground - Single Heavy Duty Common Ground Stud
• Battery Temp Sensor Port - RJ12 (standard battery temp. sensor supplied)
• Reverse Polarity - Yes, (with user replaceable fuse/s)
• Over Temperature Protection - Yes, unit de-rated and shutdown
• Equalize - 16.0 V
• Storage Range (temp) - -40° to 70° C
• Power consumption (DC 12V) - 700W (Full Load)
• Charging Control - Four stages (Bulk/Absorption/Float/Maintenance), Two
• stages (Bulk/Absorption)Constant Power Supply (Program setting), Priority
• Battery Bank Charging
• Output System Voltage - 12V
• Operating Range (temp) - -20° to 60° C
  
• Humidity - 5-95%, relative humidity non-condensing
• Net Weight (kg) - 2.6
• DC Output Connection - Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
• Output Short Circuit - Yes, (with user replaceable fuse/s)
• Power Factor Correction - Yes
• Temperature Setting - Hot, Normal, Cold (no sensor connected)
• Charger Mode Output Voltage - 14.2 – 15.5 V
• Charger Efficiency - > 82%
• AC Input Operating Range - 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)
• Standby Current - < 2 mA
• LCD Display - Charging status, Battery Voltage, Output Current & Fault Codes.
• Dimensions - 295 x 206x 86 mm (L x W x H)
• Regulatory Compliance - Complies with AS/NZS 60335.2.29 Including Australian deviations.
• AC Input Connection - IEC with Supplied 1.2M Power Lead
• Over Charge - Yes, unit shutdown
• AC Input Frequency Range - 47 – 63 Hz
• Selectable Battery Type - Gel, AGM, Flooded, Lithium, Program
• Optional Accessories - Remote Digital Display / Enerdrive Part NumberEN3REM
• Cooling - Forced air ventilation (thermo controlled fan)
  

Frequently Asked Questions (FAQ)

1. What types of batteries is this charger compatible with? This charger is highly versatile and can be set to charge most battery types, including Gel, AGM, Flooded, and Lithium.

2. How many battery banks can I charge at once? The ePOWER 40A features three DC outputs, allowing you to charge up to 3 separate battery banks. Battery bank 1 can even be programmed with a different charging algorithm than banks 2 and 3.

3. Is it safe to leave this charger connected to my batteries? Yes. It is a fully automatic, "set and forget" smart charger. Its multistage charging technology is designed to quickly charge and then maintain your batteries, maximizing their service life and making it safe for permanent connection.

4. Can I use this charger in a quiet environment, like inside a caravan at night? Yes. The charger has a "Silent Mode" feature that disables the cooling fan for 12 hours for completely silent operation. Note that activating this mode halves the charge output.